Link to Content Area

NYCU Office of Research and Development

Microtomes

  • Update Date:2025-01-15
  • Units:Instrumentation Resource Center
[YangMing] Cryostat Microtome - Leica
cryostat Leica CM3050S
  • Cryostat Microtome
    • Brand/Model: Leica CM3050S
  • Instrument Location: Yang-Ming Campus
    • 2nd floor, Nursing Department Building (C machine-CM3050S)
  • Term of use: Reservation required
    • Free of charge for NYCU students and faculties. For off-campus users, please contact the center staff before use.
  • Reservation >>> Instrument Reservation System
  • Contact center staff:
  • The scope of application of this machine is as follows:
    • For fresh tissue sections.
    • Slicing range is 1~60 μm.
    • Maximum specimen size is 5×5 cm.
    • Temperature range from room temperature to -40°C
Before use:
  1. Please register your name and instructor's name in the User Registration Book, and ensure that the machine is in good condition and the interior is tidy before use.
  2. Take the Object Disc (specimen holder), fix the specimen with Mounting Medium, and put it in the Quick-Freeze Shelf to freeze.
  3. If the CT temperature is lower than the set temperature (-10℃), wait about 1 hour until it reaches the set temperature before use.
After use:
  1. Clean the used specimen holder (Objrct disc) and return it to its original location.
  2. Use a marker to mark the part of the blade used.
  3. Apply a drop of lubricant to each rotor port with a syringe, and move the rotor up and down to keep it smooth.
  4. Clean up remaining glue, excess waste, and specimens inside the chamber.
  5. If the inside is too messy, replace the pads.
  6. Set the CT temperature back to -10°C and the OT temperature off.
  7. Tighten the handle retainer.
  8. Close the chamber window.
  1. Reservations must be made online using the Instrument Reservation System before use.
  2. Reservations can be made as early as two weeks in advance. Each user can book two sessions in 2 weeks, with a maximum of five hours for each session.
  3. For general operation training, please contact the center's staff for demonstration.
  4. Do not take the borrowed Object Disc (specimen holder) and related items away from the Center.
  5. Do not turn off the main switch (Cool-off) of the machine.
  6. Please keep it clean and functional for all students and faculty.
  7. Please read the user's manual before use.
  8. Please do not leave your belongings inside the cryochamber after use, and take away the used blades and waste.
  9. Please bring your own anti-roll plate!
  • Leica CM3050S
Related Image(s):
gotop